Filament PLA Anycubic 1 KG (Interstellar Violet)

Price: 16,79 
Cijena na prvi dan u ponudi 20.11.2026.: 16,79 
Cijena prema načinu plaćanja Detalji
  • Gotovina / uplata na račun −10 % 15,11 
  • Kartice jednokratno −7 % 15,61 
  • Pouzeće −5 % 15,95 
  • Kartice na rate 16,79 
Šifra
131
EAN
6974662351104
Kataloški broj proizvođača
IPHPL16-106
Jamstvo
12 mjeseci
Product availability: Dobavljivo kroz 10–14 radnih dana
Stanje u poslovnicama
  • Zagreb Po narudžbi
  • Varaždin Po narudžbi
  • Strmec, Sveta Nedelja Po narudžbi
Dijeli

PLA Anycubic Filament 1 KG (Interstellar Violet)

Anycubic PLA Filament combines precision and environmental protection. With perfect, clean winding, each spool guarantees a smooth, uninterrupted printing process, and a uniform diameter with a tolerance of ±0.02 mm eliminates air bubbles and the risk of nozzle clogging. Color remains intense from the first layer to the last, and biodegradable PLA from naturally grown corn is a conscious planet-friendly choice. In addition, the built-in RFiD chip automatically optimizes the printer's parameters, ensuring perfect results without the need for manual calibration. With Anycubic, every project will gain brilliance and top quality.

Filament w kolorze fioletowym, obok niego stoi mysz do komputera wykonana za pomocą druku 3D.

Perfect winding without tangles

Anycubic's filament spool is designed to ensure perfect material winding. Thanks to the precise control of the filament tension, you don't have to worry about jams or unexpected interruptions. Every meter of Anycubic filament extends smoothly and without interference, resulting in a stable and uninterrupted printing process.

Mysz komputerowa w kolorze zielonym wykonana za pomocą druku 3D.

Perfect precision and color uniformity

The filament maintains a uniform diameter with a tolerance of +0.02 mm, which guarantees no air bubbles and completely eliminates the risk of nozzle clogging. Each layer of the print looks even and smooth and the color remains intense and consistent from the beginning to the end of the project.

Cztery rolki filamentów w różnych kolorach na błękitnym tle.

Environmentally friendly material

The PLA used in Anycubic's filament is made from lactic acid created by fermenting corn starch or other plants. Thanks to its biodegradable nature, it is friendly to the planet and completely safe to use. By choosing Anycubic you not only care about the quality of your prints, but also the environment.

Figurka przedstawiająca karuzelę w biało-niebieskim kolorze stojąca na drewnianej szafce nocnej.

Smart settings with RFiD technology

The spooler's built-in RFiD chip works with the separately available Anycubic Color Engine Pro module to automatically recognize the type of filament and adjust printer parameters. Print settings are optimized non-intrusively, allowing you to achieve the best results without having to manually calibrate the device.

Cztery pary okularów przeciwsłonecznych, których ramy zostały wykonane za pomocą druku 3D.

 

ManufacturerAnycubic
ModelIPHPL16-106
MaterialPLA
Dimensions1.75±0.02mm
Total length330 m
Weight1 kg
Hardness81D
Nozzle temperature200-210℃
Heating table temperature50-60℃
Tensile strength61 Mpa
Volume1.23g/cm³
ColorPurple (Interstellar Violet)

  • Marka
  • Referenca
    IPHPL16-106
  • Na skladištu
    87 Artikli
  • ean13
    6974662351104
  • MPN
    IPHPL16-106

  • Jamstvo
    12 mjeseci
Sigurno plaćanje
Kartične podatke obrađuje banka, mi ih ne vidimo.
Brza dostava
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Povrat u 14 dana
Robu možete vratiti bez navođenja razloga.

Komentari (0)

Trenutno nema recenzija korisnika.

4 other products in the same category

Hyper PLA Filament Creality (Grey)
16,79 
Gotovina / uplata na račun: 15,11 
Cijena na prvi dan u ponudi 20.11.2026.: 16,79 
Rated out of 5 stars based on review(s)
Sunlu FC01 Filament Joining System
47,99 
Gotovina / uplata na račun: 43,19 
Cijena na prvi dan u ponudi 20.11.2026.: 47,99 
Rated out of 5 stars based on review(s)
Sun Filament PLA-Silk 1.75mm 1kg (black)
20,79 
Gotovina / uplata na račun: 18,71 
Cijena na prvi dan u ponudi 20.11.2026.: 20,79 
Rated out of 5 stars based on review(s)

Pregledani proizvodi

MAKERA Carvera Air 2mm MDF Base Panels (5 pcs)
44,79 
Gotovina / uplata na račun: 40,31 
Cijena na prvi dan u ponudi 20.11.2026.: 44,79 
Rated out of 5 stars based on review(s)
AnyCubic PLA Pantone Filament Set (4 pcs)
59,19 
Gotovina / uplata na račun: 53,27 
Cijena na prvi dan u ponudi 20.11.2026.: 59,19 
Rated out of 5 stars based on review(s)
eSun PLA-Basic Filament 1.75mm 1kg (Aqua)
19,99 
Gotovina / uplata na račun: 17,99 
Cijena na prvi dan u ponudi 20.11.2026.: 19,99 
Rated out of 5 stars based on review(s)
ELEGOO Standard 1.0 Resin (semi-transparent)
20,79 
Gotovina / uplata na račun: 18,71 
Cijena na prvi dan u ponudi 20.11.2026.: 20,79 
Rated out of 5 stars based on review(s)
Učitavanje...
Povratak na vrh