Anycubic AirPure 2.0 Air Purifier

Price: 56,79 
Cijena na prvi dan u ponudi 20.11.2026.: 56,79 
Cijena prema načinu plaćanja Detalji
  • Gotovina / uplata na račun −10 % 51,11 
  • Kartice jednokratno −7 % 52,81 
  • Pouzeće −5 % 53,95 
  • Kartice na rate 56,79 
Šifra
519
EAN
5905156104648
Kataloški broj proizvođača
AP20WH0A-O
Jamstvo
12 mjeseci
Product availability: Dobavljivo kroz 10–14 radnih dana
Stanje u poslovnicama
  • Zagreb Po narudžbi
  • Varaždin Po narudžbi
  • Strmec, Sveta Nedelja Po narudžbi
Dijeli

Anycubic AirPure 2.0 Air Purifier

The Anycubic AirPure 2.0 air purifier is a compact ventilation system for 3D printers that operates continuously and effectively removes fumes and gases from the build chamber. The device offers an airflow rate of 49.86 CFM, allowing it to quickly vent contaminants outside. With a power supply range of 100–240 V and low power consumption of approximately 12 W, the unit is energy-efficient and convenient for everyday use. A noise level of approximately 45 dB allows for extended operation without significant discomfort. This model is compatible with, among others, the Photon P1 printer and can support one or two printers simultaneously, though in some configurations it requires additional components or their printing.

Flexible ventilation tube connected to a 3D printer and routed out through a window

Constant ventilation and comfortable operation

AirPure 2.0 runs continuously once started, constantly removing contaminated air from inside the printer. This solution reduces the buildup of fumes and improves indoor air quality. This is particularly important during long-duration prints, where odor emissions are more intense. As a result, using the printer becomes more comfortable and less of a nuisance.

Two 3D printers placed side by side on a table, both connected to the ventilation system

Performance and energy efficiency

With a performance of nearly 50 CFM, the device quickly removes air from the working chamber. At the same time, low power consumption of approximately 12 W helps reduce energy usage during continuous operation. This allows the system to be left on for many hours without any issues. The constant airflow also supports stable operating conditions for the printer.

3D printer connected to a ventilation tube leading to the wall next to a window

Mounting and installation requirements

AirPure 2.0 can be mounted near a ventilation opening or in a window, depending on available space. For different types of windows, additional mounting components may be required, which are not always included in the kit. For casement windows, separate sealing accessories are required. It is also important to consider the diameter of the pipes, which is typically around 60–80 mm, to properly prepare the installation site.

Rear of the device with a flexible ventilation tube connected

Included in the package

  • Main unit
  • Exhaust hose
  • Intake hose
  • Clamp
  • Power adapter
  • User manual

 

ManufacturerAnycubic
ModelAirPure 2.0
CompatibilityPhoton P1
Rated voltage100–240 V, 50/60 Hz
Output power12V / 1A
Fan speed3800 (±10%) RPM
Noise level45 ±3 dB
Operating range8–40°C, humidity 20–90%

  • Marka
  • Referenca
    AP20WH0A-O
  • Na skladištu
    62 Artikli
  • ean13
    5905156104648
  • MPN
    AP20WH0A-O

  • Jamstvo
    12 mjeseci
Sigurno plaćanje
Kartične podatke obrađuje banka, mi ih ne vidimo.
Brza dostava
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Povrat u 14 dana
Robu možete vratiti bez navođenja razloga.

Komentari (0)

Trenutno nema recenzija korisnika.

4 other products in the same category

QiDi Chamber Heater for the Max4 Series
74,39 
Gotovina / uplata na račun: 66,95 
Cijena na prvi dan u ponudi 20.11.2026.: 74,39 
Rated out of 5 stars based on review(s)

Pregledani proizvodi

Creality Falcon A1C 10W Laser Engraver
345,59 
Gotovina / uplata na račun: 311,03 
Cijena na prvi dan u ponudi 20.11.2026.: 345,59 
Rated out of 5 stars based on review(s)
Filament PETG Pro ELEGOO (Szary)
19,99 
Gotovina / uplata na račun: 17,99 
Cijena na prvi dan u ponudi 20.11.2026.: 19,99 
Rated out of 5 stars based on review(s)
Sunlu PLA+ 2.0 Filament (Sunny Orange)
20,79 
Gotovina / uplata na račun: 18,71 
Cijena na prvi dan u ponudi 20.11.2026.: 20,79 
Rated out of 5 stars based on review(s)
CR-Silk PLA Filament Creality (Purple)
26,39 
Gotovina / uplata na račun: 23,75 
Cijena na prvi dan u ponudi 20.11.2026.: 26,39 
Rated out of 5 stars based on review(s)
Učitavanje...
Povratak na vrh