xTool Air Assist 2.0 AUTO Air Assist Kit for the S1/M1 Series

Price: 206,39 
Cijena na prvi dan u ponudi 20.11.2026.: 206,39 
Cijena prema načinu plaćanja Detalji
  • Gotovina / uplata na račun −10 % 185,75 
  • Kartice jednokratno −7 % 191,94 
  • Pouzeće −5 % 196,07 
  • Kartice na rate 206,39 
Šifra
548
EAN
6928819520998
Kataloški broj proizvođača
P5010254
Jamstvo
24 mjeseca (2 godine)
Product availability: Dobavljivo kroz 10–14 radnih dana
Stanje u poslovnicama
  • Zagreb Po narudžbi
  • Varaždin Po narudžbi
  • Strmec, Sveta Nedelja Po narudžbi
Dijeli

xTool Air Assist 2.0 AUTO Air Assist Kit for the S1/M1 Series

The xTool Air Assist 2.0 AUTO Air Assist Kit for the xTool S1 and xTool M1 laser cutters is a practical accessory that improves cutting and engraving precision. Automatic airflow control adjusts the intensity of the airflow to the task at hand, and a flow rate of 30 l/min effectively removes smoke, dust, and material particles from the work area. As a result, edges are cleaner, scorching is minimized, and finished projects look more aesthetically pleasing. The built-in filtration system protects the pump from contaminants, extending its service life, while power supplied directly from the plotter eliminates the need for an additional power supply.

The xTool 40W laser module engraves a butterfly in wood; a blue beam of light and smoke emerge from the nozzle

Automatic Airflow Adjustment

Air Assist 2.0 AUTO automatically adjusts the airflow intensity depending on the task at hand. During engraving, it uses a lower airflow, which helps maintain high precision in the details. During cutting, it increases the airflow, effectively removing smoke and material residue. This eliminates the need for the user to manually adjust settings, making the entire process smoother and more convenient.

A man connects the black Air Assist compressor to the rear panel of the xTool laser cutter on a light-colored table using a cable

Cleaner cutting and better results

An efficient airflow of up to 30 liters per minute helps keep the work area clean during laser operation. Removing smoke and dust improves visibility of the laser beam and reduces scorch marks on the material. The result is smoother edges, more precise cuts, and more aesthetically pleasing engravings that require less post-processing once the job is complete.

Comparison of two wooden butterflies cut with the xTool laser—the one on the left has sooty edges, while the one on the right has clean edges

Full compatibility with xTool plotters

The kit is specifically designed to work with the xTool S1 and xTool M1 plotters. Simple installation and automatic operation make it a practical way to expand the device’s capabilities for both those working on individual projects and users who regularly work with lasers. Thanks to more effective smoke and dust extraction, it is possible to achieve better cutting and engraving quality on many types of materials.

Two close-up shots of the xTool laser head cutting a butterfly out of plywood with different airflow intensities

 

ManufacturerxTool
ModelAir Assist 2.0 AUTO
CompatibilityxTool S1, xTool M1
Maximum Air Flow Rate30 l/min
Automatic Air Flow Controlyes
Built-in Air Filtration Systemyes

  • Marka
  • Referenca
    P5010254
  • Na skladištu
    10 Artikli
  • ean13
    6928819520998
  • MPN
    P5010254

  • Jamstvo
    24 mjeseca (2 godine)
Sigurno plaćanje
Kartične podatke obrađuje banka, mi ih ne vidimo.
Brza dostava
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Povrat u 14 dana
Robu možete vratiti bez navođenja razloga.

Komentari (0)

Trenutno nema recenzija korisnika.

4 other products in the same category

Anycubic PEI Plate for the Kobra 2 Neo
32,79 
Gotovina / uplata na račun: 29,51 
Cijena na prvi dan u ponudi 20.11.2026.: 32,79 
Rated out of 5 stars based on review(s)
ELEGOO Neptune 4 Series Filament Sensor
20,79 
Gotovina / uplata na račun: 18,71 
Cijena na prvi dan u ponudi 20.11.2026.: 20,79 
Rated out of 5 stars based on review(s)
Učitavanje...
Povratak na vrh