Filament eSun PLA-Silk Magic 1.75mm 1kg (red gold)
- Gotovina / uplata na račun −10 % 27,35
- Kartice jednokratno −7 % 28,26
- Pouzeće −5 % 28,87
- Kartice na rate 30,39
- Šifra
- 694
- EAN
- 6922572205284
- Kataloški broj proizvođača
- PLA-SKMG175B-RJ1P1
eSun PLA-Silk Magic 1.75 mm Filament
eSUN PLA-Silk Magic 1.75 mm filament in red and gold is a PLA-based 3D printing material that stands out for its interplay of two colors and silky sheen. Thanks to the filament’s two-color cross-section, the model’s appearance changes depending on the viewing angle. The smooth surface with invisible layer lines gives prints an elegant look and highlights the design details.
Two-Color Effect and Visual Depth
The combination of two colors with a glossy finish creates a sense of visual depth that accentuates the shapes and contours of printed models. This filament is ideal for creating figurines, decorative elements, and projects where appearance plays a particularly important role. Due to its heat deflection temperature of approximately 55°C, this material is best suited for prints that will not be exposed to high temperatures.
Printing Parameters
The 1.75 mm diameter filament is wound onto a spool containing 1 kg of material. The recommended nozzle temperature is 190–230°C, and the bed temperature is 45–60°C. A heated bed is required for printing. The print speed should be less than 200 mm/s, and cooling should be set to 100%. To achieve a more intense surface gloss, it is recommended to reduce the print speed for the model’s outer walls.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SKMG175B-RJ1P1 |
| Filament Type | PLA-Silk Magic |
| Color | red-gold |
| Filament Diameter | 1.75 mm |
| Filament Weight | 1 kg |
| Nozzle Temperature | 190–230°C |
| Build Plate Temperature | 45–60°C |
| Heated Build Plate | required |
| Recommended Print Speed | below 200 mm/s |
| Fan cooling | 100% |
| Heat Deflection Temperature (HDT) | 54.7°C |
| Melt Flow Index (MFI) | 4.5 g/10 min (190°C / 2.16 kg) |
| Tensile strength (Z) | 12.82 MPa |
| Elongation at break (Z) | 1.47% |
| Flexural strength (XY) | 64.2 MPa |
| Flexural modulus (XY) | 2486.54 MPa |
| IZOD impact strength (XY) | 2.87 kJ/m² |
-
Marka
-
ReferencaPLA-SKMG175B-RJ1P1
-
Na skladištu39 Artikli
-
ean136922572205284
-
MPNPLA-SKMG175B-RJ1P1
Kartične podatke obrađuje banka, mi ih ne vidimo.
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Robu možete vratiti bez navođenja razloga.
Komentari (0)
Vaša zahvala za recenziju ne može biti poslana
Prijavi komentar
Prijava poslana
Vaš komentar ne može biti poslan