Filament eSun PLA-Silk Magic 1.75mm 1kg (purple gold)

Price: 30,39 
Cijena na prvi dan u ponudi 20.11.2026.: 30,39 
Cijena prema načinu plaćanja Detalji
  • Gotovina / uplata na račun −10 % 27,35 
  • Kartice jednokratno −7 % 28,26 
  • Pouzeće −5 % 28,87 
  • Kartice na rate 30,39 
Šifra
697
EAN
6922572205291
Kataloški broj proizvođača
PLA-SKMG175B-ZJ1P1
Product availability: Dobavljivo kroz 10–14 radnih dana
Stanje u poslovnicama
  • Zagreb Po narudžbi
  • Varaždin Po narudžbi
  • Strmec, Sveta Nedelja Po narudžbi
Dijeli

eSun PLA-Silk Magic 1.75 mm Filament

eSUN PLA-Silk Magic 1.75 mm filament in purple and gold is a PLA-based 3D printing material that stands out for its interplay of two colors and silky sheen. Thanks to the filament’s two-color cross-section, the model’s appearance changes depending on the viewing angle. The smooth surface with invisible layer lines gives prints an elegant look and highlights the design details.

A spool of eSun PLA-Silk Magic 1.75 mm filament on a gray gradient background

Two-Color Effect and Visual Depth

The combination of two colors with a glossy finish creates a sense of visual depth that accentuates the shapes and contours of printed models. This filament is ideal for creating figurines, decorative elements, and projects where appearance plays a particularly important role. Due to its heat deflection temperature of approximately 55°C, this material is best suited for prints that will not be exposed to high temperatures.

Three colorful spools of filament on a colorful gradient background

Printing Parameters

The 1.75 mm diameter filament is wound onto a spool containing 1 kg of material. The recommended nozzle temperature is 190–230°C, and the bed temperature is 45–60°C. A heated bed is required for printing. The print speed should be less than 200 mm/s, and cooling should be set to 100%. To achieve a more intense surface gloss, it is recommended to reduce the print speed for the model’s outer walls.

Colorful 3D-printed figurines on display stands

 

ManufacturereSUN
ModelPLA-SKMG175B-ZJ1P1
Filament TypePLA-Silk Magic
Colorpurple and gold
Filament Diameter1.75 mm
Filament Weight1 kg
Nozzle Temperature190–230°C
Build Plate Temperature45–60°C
Heated Build Platerequired
Recommended Print Speedbelow 200 mm/s
Fan cooling100%
Heat Deflection Temperature (HDT)54.7°C
Melt Flow Index (MFI)4.5 g/10 min (190°C / 2.16 kg)
Tensile strength (Z)12.82 MPa
Elongation at break (Z)1.47%
Flexural strength (XY)64.2 MPa
Flexural modulus (XY)2486.54 MPa
IZOD impact strength (XY)2.87 kJ/m²

  • Marka
  • Referenca
    PLA-SKMG175B-ZJ1P1
  • Na skladištu
    40 Artikli
  • ean13
    6922572205291
  • MPN
    PLA-SKMG175B-ZJ1P1
Sigurno plaćanje
Kartične podatke obrađuje banka, mi ih ne vidimo.
Brza dostava
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Povrat u 14 dana
Robu možete vratiti bez navođenja razloga.

Komentari (0)

Trenutno nema recenzija korisnika.

4 other products in the same category

Anycubic ASA Filament (Black) 1 kg
26,39 
Gotovina / uplata na račun: 23,75 
Cijena na prvi dan u ponudi 20.11.2026.: 26,39 
Rated out of 5 stars based on review(s)
Sunlu PLA+ Silk Filament (Rainbow 02)
29,59 
Gotovina / uplata na račun: 26,63 
Cijena na prvi dan u ponudi 20.11.2026.: 29,59 
Rated out of 5 stars based on review(s)
CR-PETG Filament Creality (Transparent blue)
19,99 
Gotovina / uplata na račun: 17,99 
Cijena na prvi dan u ponudi 20.11.2026.: 19,99 
Rated out of 5 stars based on review(s)
Sunlu PLA Classic Sakura Pink Filament
15,99 
Gotovina / uplata na račun: 14,39 
Cijena na prvi dan u ponudi 20.11.2026.: 15,99 
Rated out of 5 stars based on review(s)

Pregledani proizvodi

Sun Filament PLA-Matte 1.75mm 1kg (light khaki)
20,79 
Gotovina / uplata na račun: 18,71 
Cijena na prvi dan u ponudi 20.11.2026.: 20,79 
Rated out of 5 stars based on review(s)
Učitavanje...
Povratak na vrh