AnyCubic Tough Resin 2.0 (Black)

Price: 28,79 
Cijena na prvi dan u ponudi 20.11.2026.: 28,79 
Cijena prema načinu plaćanja Detalji
  • Gotovina / uplata na račun −10 % 25,91 
  • Kartice jednokratno −7 % 26,77 
  • Pouzeće −5 % 27,35 
  • Kartice na rate 28,79 
Šifra
71
EAN
6974662350817
Kataloški broj proizvođača
SRX2BK-101A
Jamstvo
12 mjeseci
Product availability: Dobavljivo kroz 10–14 radnih dana
Stanje u poslovnicama
  • Zagreb Po narudžbi
  • Varaždin Po narudžbi
  • Strmec, Sveta Nedelja Po narudžbi
Dijeli

AnyCubic Tough Resin 2.0 (Black)

AnyCubic resin is a unique plastic that exhibits increased strength. It is relatively flexible and resistant to cracking, making it possible to print miniature components and thin models as well. What's more, finished models made with this resin are less likely to be damaged, even after falling from heights. Tough Resin 2.0 was created with environmentally friendly ingredients that do not irritate or emit intense odors. It is compatible with most LCD 3D printers.

1.jpg

The perfect choice for perfectionists

Tough Resin 2.0 is perfect for prints that require more precision. It is suitable for printing in the wavelength range of 365nm to 405nm, allowing you to achieve optimal results. The resin also exhibits less shrinkage. As a result, your models are full of detail and their surface is perfectly finished - especially when used in conjunction with AnyCubic printers.

5.jpg

 

Physical and Chemical Properties:

UV wavelength: 365-405 nm
Density: 1.10-1.15 g/cm³
Viscosity: 450-500 cPimPa-s
Hardness: 82-84D
Tensile strength: 30-42 MPa
Extension at fracture: 60-72%
Shrinkage at forming: 5.1-6.2%
Bending strength: 42-52 MPa
Modulus of elasticity at bending: 1500-2000 MPa
Heat distortion resistance temperature: 50-55°C
Exposure time for bottom layer: 20-40s
Standard exposure time: 1.5-3s (for color screens 8s)
Resin cleaning: Alcohol
Shelf life: 1.5 years
Color Black

 

Recommended Printing Parameters for Various Models of Anycubic 3D Printers (Photon Mono M3 Pro, Photon Mono 6K, Photon Ultra, etc.):

Layer thickness: 0.05 mm
Exposure time: 1.5s to 3.6s
No-exposure time: 1s
Exposure time of lower layers: 20s to 35s
Number of lower layers: 5-6
Anti-aliasing: 1
Z Lift distance: 5mm to 10mm
Z Lift speed: 2mm/s to 6mm/s
Z Retract Speed: 2mm/s do 6mm/s

 

Download:

Safety data sheet

  • Marka
  • Referenca
    SRX2BK-101A
  • Na skladištu
    380 Artikli
  • ean13
    6974662350817
  • MPN
    SRX2BK-101A

  • Jamstvo
    12 mjeseci
Sigurno plaćanje
Kartične podatke obrađuje banka, mi ih ne vidimo.
Brza dostava
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Povrat u 14 dana
Robu možete vratiti bez navođenja razloga.

Komentari (0)

Trenutno nema recenzija korisnika.

4 other products in the same category

AnyCubic DLP Craftsman Resin (Beige)
32,79 
Gotovina / uplata na račun: 29,51 
Cijena na prvi dan u ponudi 20.11.2026.: 32,79 
Rated out of 5 stars based on review(s)
ANYCUBIC Standard Resin (black)
18,39 
Gotovina / uplata na račun: 16,55 
Cijena na prvi dan u ponudi 20.11.2026.: 18,39 
Rated out of 5 stars based on review(s)
ANYCUBIC Standard Resin (crimson clay)
18,39 
Gotovina / uplata na račun: 16,55 
Cijena na prvi dan u ponudi 20.11.2026.: 18,39 
Rated out of 5 stars based on review(s)
ANYCUBIC ABS-Like Resin Pro 2 (Transparent)
27,19 
Gotovina / uplata na račun: 24,47 
Cijena na prvi dan u ponudi 20.11.2026.: 27,19 
Rated out of 5 stars based on review(s)

Pregledani proizvodi

Sunlu PLA Classic Lemon Filament
17,59 
Gotovina / uplata na račun: 15,83 
Cijena na prvi dan u ponudi 20.11.2026.: 17,59 
Rated out of 5 stars based on review(s)
Revopoint Trackit SR CMM 3D Optical Scanner
4.442,39 
Gotovina / uplata na račun: 3.998,15 
Cijena na prvi dan u ponudi 20.11.2026.: 4.442,39 
Rated out of 5 stars based on review(s)
Sunlu PLA+ Silk Filament (Rainbow 02)
29,59 
Gotovina / uplata na račun: 26,63 
Cijena na prvi dan u ponudi 20.11.2026.: 29,59 
Rated out of 5 stars based on review(s)
Učitavanje...
Povratak na vrh