ELEGOO PETG-CF Carbon Fiber Filament (Black) 0.5 kg

Price: 19,99 
Cijena na prvi dan u ponudi 20.11.2026.: 19,99 
Cijena prema načinu plaćanja Detalji
  • Gotovina / uplata na račun −10 % 17,99 
  • Kartice jednokratno −7 % 18,59 
  • Pouzeće −5 % 18,99 
  • Kartice na rate 19,99 
Šifra
755
EAN
6932704922194
Kataloški broj proizvođača
50.203.0647
Jamstvo
24 mjeseca (2 godine)
Product availability: Dobavljivo kroz 10–14 radnih dana
Stanje u poslovnicama
  • Zagreb Po narudžbi
  • Varaždin Po narudžbi
  • Strmec, Sveta Nedelja Po narudžbi
Dijeli

ELEGOO PETG-CF Filament (Black)

ELEGOO filament (0.5 kg) is a material designed for demanding projects where high stiffness, mechanical strength, and abrasion resistance are essential. The addition of carbon fiber significantly reinforces the filament’s structure while maintaining good impact resistance, ensuring that prints are sturdy, stable, and ready for heavy-duty use.

The black Elegoo Centauri Carbon 3D printer sits on a table next to spools of filament and printed objects

A professional finish without compromise

The matte, carbon-fiber surface texture gives models a modern, technical look and effectively reduces layer visibility. The final result is aesthetically pleasing and refined, making ELEGOO filament ideal for functional prototypes as well as parts that need to look good without additional finishing.

A black spool of filament next to a black printed helmet and a black figurine on a rock against a black background

Stable printing and high-quality results

Thanks to its low shrinkage and minimal tendency to warp, the material remains stable during cooling, resulting in precise and repeatable prints. The recommended nozzle temperature is 240–270°C, and the build plate temperature is 65–75°C—these settings allow you to fully harness the material’s potential while maintaining control over the printing process.

Two hands hold and bend a thin, black 3D printer filament into an arc against a dark background

Ready to use right out of the box

The filament is wound evenly and precisely onto a 45 × 200 mm spool, and the entire package is vacuum-sealed, which protects the material from moisture and guarantees its high quality from the moment you open it. ELEGOO filament is compatible with most FDM 3D printers, so you can easily adapt it to your workspace.

Close-up of three spools of black 3D printer filament lined up side by side

 

ManufacturerElegoo
Model50.203.0648
ColorBlack
Density1.29 g/cm³
Melting Point226°C
Vicat Softening Point83°C
Heat Deflection Temperature74°C
Tensile Strength – XY51 ± 8 MPa
Elongation at break – XY9.6% ± 1.0%
Flexural modulus – XY3340 ± 21 MPa
Flexural strength – XY85 ± 2 MPa
Impact strength – XY70.7 ± 6.2 kJ/m²
Weight0.5 kg

  • Marka
  • Referenca
    50.203.0647
  • Na skladištu
    181 Artikli
  • ean13
    6932704922194
  • MPN
    50.203.0647

  • Jamstvo
    24 mjeseca (2 godine)
Sigurno plaćanje
Kartične podatke obrađuje banka, mi ih ne vidimo.
Brza dostava
Artikli na lageru šalju se u 1–2 radna dana. Besplatna dostava iznad 200 €.
Povrat u 14 dana
Robu možete vratiti bez navođenja razloga.

Komentari (0)

Trenutno nema recenzija korisnika.

4 other products in the same category

Sunlu PLA+ Silk Filament (Red)
20,79 
Gotovina / uplata na račun: 18,71 
Cijena na prvi dan u ponudi 20.11.2026.: 20,79 
Rated out of 5 stars based on review(s)
Sunlu PLA Classic Black Filament 1.75mm 1KG
17,59 
Gotovina / uplata na račun: 15,83 
Cijena na prvi dan u ponudi 20.11.2026.: 17,59 
Rated out of 5 stars based on review(s)
Anycubic ASA Filament (Gray) 1 kg
26,39 
Gotovina / uplata na račun: 23,75 
Cijena na prvi dan u ponudi 20.11.2026.: 26,39 
Rated out of 5 stars based on review(s)

Pregledani proizvodi

Anycubic TPU Filament (Milky White) 1 kg
29,59 
Gotovina / uplata na račun: 26,63 
Cijena na prvi dan u ponudi 20.11.2026.: 29,59 
Rated out of 5 stars based on review(s)
Učitavanje...
Povratak na vrh