Sunlu S4 Filament Dryer

Price: 142.39
Price on the first day on sale 20.11.2026.: 142.39
Price by payment method Details
  • Cash / bank transfer −10 % 128.15
  • Card, one-time payment −7 % 132.42
  • Cash on delivery −5 % 135.27
  • Card instalments 142.39
Item code
404
EAN
6933582312640
Manufacturer part number
Fila Dryer S4
Warranty
12 months
Product availability: Available in 10–14 working days
Stock in our stores
  • Zagreb To order
  • Varaždin To order
  • Strmec, Sveta Nedelja To order
Share

Sunlu S4 Filament Dryer

The SUNLU FilaDryer S4 is an advanced filament dryer designed for demanding 3D printing users. It offers a massive capacity—drying up to 4 spools (1 kg each) simultaneously—and the ability to work with multiple printers at once. With a power output of 320–330 W, rapid heating (up to 50°C in just 30 minutes), and a maximum temperature of 70°C, the device ensures effective and uniform drying of even the most demanding materials, such as PA or PC. The built-in humidity control system, touchscreen, 8 filament outputs, and predefined material profiles make using the device not only effective but also extremely convenient.

SUNLU S4 dryer with two filament spools against the backdrop of a dark, volcanic landscape

Dry up to 4 filaments simultaneously – maximum productivity

Thanks to the large chamber (450 × 210 × 211 mm), you can dry up to four spools of filament at the same time. This is the perfect solution for multicolor printing or working with multiple printers simultaneously. You don’t waste time changing materials—everything is ready in one place, which significantly speeds up and streamlines the entire process.

SUNLU S4 filament dryer connected to two 3D printers during simultaneous drying and printing

Instant heating and high power – efficiency that makes a difference

Performance is ensured by a PTC heater with a power of up to 330 W, which allows it to reach 50°C in about 30 minutes and a maximum of 70°C. This means shorter filament preparation time and greater drying efficiency. Even difficult, hygroscopic materials regain their properties faster than ever before.

SUNLU S4 filament dryer with illuminated interior and finished 3D prints placed nearby

Ideal temperature balance – perfect drying for every spool

A three-fan system (on the sides and bottom) ensures even air circulation and temperature stability within ±3°C. This ensures that every section of the filament is dried evenly, resulting in better print quality, greater consistency, and no surprises during operation.

View of the interior of the SUNLU S4 filament dryer holding four filament spools in separate chambers

Smart humidity control – filament always in perfect condition

An advanced humidity control system automatically starts drying when the humidity level exceeds the set range (30–50%) and stops the process once optimal conditions are reached (approx. 25%). This means full automation and the assurance that the filament is always ready for use—without manual monitoring.

The SUNLU S4 dryer with a visualization of moisture removal and filament quality improvement

Safety and ease of use – technology you can rely on

The SUNLU S4 is equipped with a triple safety system: a PTC heater, a temperature sensor, and software protection. The device monitors temperature in real time and alerts you to any abnormalities, ensuring safe operation. Additionally, the touchscreen and pre-set profiles for PLA, ABS, PETG, TPU, PA, and PC simplify operation and eliminate the guesswork involved in settings.

The SUNLU S4 dryer with a graphic representation of hot air circulation inside the unit

Full compatibility and flexibility – tailor the equipment to your needs

Support for filaments with diameters of 1.75 mm, 2.85 mm, and 3.00 mm, along with compatibility with most 3D printers, ensures the SUNLU S4 performs well in any environment. Eight filament outputs and the ability to connect multiple printers simultaneously allow for flexible workstation configuration. This device truly expands your capabilities and lets you create without limits.

A cross-section of the SUNLU S4 dryer’s design showing the heating system and fans

Included:

  • SUNLU S4 Filament Dryer
  • Power cord
  • PTFE tubes
  • User manual

 

ManufacturerSunlu
ModelFila Dryer S4
Rated power320–330 W
Power supplyAC 100–240 V / 50–60 Hz
Maximum temperature70°C
Heating time to 50°Capprox. 30 minutes
Capacity4 spools (1 kg each)
Internal dimensions450 × 210 × 211 mm
Device dimensions516 × 278 × 350 mm
Net weight4.8 kg
Gross weight5.5 kg
Heating systemPTC + 3 fans
Temperature stability±3°C
Humidity controlAutomatic (start 30–50%, stop approx. 25%)
Supported materialsPLA, ABS, PETG, TPU, PA, PC
Supported filament diameters1.75 mm / 2.85 mm / 3.00 mm
Number of filament outlets8 (can be used with PTFE tubes)
DisplayTouchscreen LCD

  • Brand
  • Reference
    Fila Dryer S4
  • In stock
    125 Items
  • EAN13
    6933582312640
  • MPN
    Fila Dryer S4

  • Warranty
    12 months
Secure payment
Card details are processed by the bank; we never see them.
Fast delivery
Items in stock ship within 1–2 working days. Free delivery over €200.
14-day returns
You can return goods without giving a reason.

Comments (0)

No customer reviews for the moment.

4 other products in the same category

ELEGOO Saturn 4 3D Printer
323.99
Cash / bank transfer: 291.59
Price on the first day on sale 20.11.2026.: 323.99
Rated out of 5 stars based on review(s)
Creality Ender-3 V3 3D Printer
261.59
Cash / bank transfer: 235.43
Price on the first day on sale 20.11.2026.: 261.59
Rated out of 5 stars based on review(s)
Anycubic Photon Mono M7 Pro 3D Printer
523.99
Cash / bank transfer: 471.59
Price on the first day on sale 20.11.2026.: 523.99
Rated out of 5 stars based on review(s)
Anycubic Kobra 3 V2 Combo 3D Printer
340.79
Cash / bank transfer: 306.71
Price on the first day on sale 20.11.2026.: 340.79
Rated out of 5 stars based on review(s)

Viewed products

ELEGOO Saturn 4 Ultra 16K 3D Printer
451.99
Cash / bank transfer: 406.79
Price on the first day on sale 20.11.2026.: 451.99
Rated out of 5 stars based on review(s)
Creality TPU Filament (Blue)
23.99
Cash / bank transfer: 21.59
Price on the first day on sale 20.11.2026.: 23.99
Rated out of 5 stars based on review(s)
3D Printer Creality Ender-3 V3 Neo Combo
347.99
Cash / bank transfer: 313.19
Price on the first day on sale 20.11.2026.: 347.99
Rated out of 5 stars based on review(s)
Sunlu PLA+ 2.0 Filament (Olive)
20.79
Cash / bank transfer: 18.71
Price on the first day on sale 20.11.2026.: 20.79
Rated out of 5 stars based on review(s)
Loading...
Back to top